Alcorn Mcbride 8 TraXX User Manual

Browse online or download User Manual for MP3/MP4 players Alcorn Mcbride 8 TraXX. GPS for 8-TraXX + DVM - Alcorn McBride, Inc.

  • Download
  • Add to my manuals
  • Print
  • Page
    / 6
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 0
Using GPS with an 8-TraXX and DVM
Introduction
This application note describes the use of the DVM7400/G video machine and 8TraXX
audio machine presenting multilingual audio/visual programs for tour bus applications.
The system provides up to 18 mono or 9 stereo audio tracks with a video display all
triggered to present local site information which is map location dependent. The power of
GPS signaling is finding its way into many applications and Alcorn McBride has
embraced this technology. GPS receivers are smaller and more convenient than ever
before. Alcorn McBride audio visual players also use GPS receivers to trigger the
playback of files in order to present location dependent content for tour vehicles.
Hardware Connections
The DVM is the GPS control unit for the system and plays the video content and a single
stereo channel (left and right) of audio. The 8TraXX is the multichannel audio play back
unit that supports 8 stereo channels. The 8TraXX is connected by RS232 using the cable
supplied with the unit and is connected to the port labeled RS232. This connector is
located just to the right of the volume control. The GPS mouse is connected to the GPS
module of the DVM/G by the round 6-pin din connector labeled GPS. The 9-pin
connector in the same module labeled Serial is an RS232 output only port used for
sending data to an optional vehicle information sign. Vehicle power is supplied to both
units and is standard 12-14 volts DC. The DVM7400/G have two power connectors, one
round two pin connector to the far left bottom and the other is a 4-pin square Molex type
connector located to the far right on the GPS module. It is not necessary connect power to
both power ports.
GPS Antennas
There are three types of antennas, two magnetic (mouse) antennas and the bulkhead
mount. The older type mouse antenna is dark blue with the Deluo logo on the top. This
antenna will connect directly to the USB adapter when connected to the PC but will need
a cable adapter to connect to the DVM or AM4.
The new type mouse antenna is black and will have the Alcorn McBride logo on top. This
antenna will require the cable adapter when connected to the USB adapter because it was
designed to plug directly into the back of the DVM with the /G module without the cable
adapter.
You may want to use the bulkhead antenna in place of the magnetic antenna for
permanent installations. This antenna will connect directly to the DVM/G.
Using GPS with an 8-TraXX and DVM Page 1
Page view 0
1 2 3 4 5 6

Summary of Contents

Page 1

Using GPS with an 8-TraXX and DVMIntroductionThis application note describes the use of the DVM7400/G video machine and 8‑TraXX audio machine prese

Page 2

Just a note, the USB and cable adapters are needed if you want to drive the route to enter waypoints. These adapters are needed only to interface t

Page 3

the location is left mouse button is pressed. These can then be copied to the fields in the playlist. In some cases, the map graphics may not

Page 4

the CF card. The second line “Play to 8‑TraXX” will play file “1” when the vehicle is traveling in the “compass direction” of 351 degrees

Page 5

Player ContentThe DVM will play the video files for each site location and may play a stereo track of audio as well. If video is to be played wit

Page 6

The DVM will then signal the 8‑ TraXX to start playing the following files on the selected channels. The Data1 field contains the file number or na

Comments to this Manuals

No comments